Pair: 4 - 24
Cross-Section: 0.75 mm2 - 2.5 mm2
Cables | Control cables
BIRTFLEX-CY-HF
Application:

These high-flexibility control cables are designed for applications where cable flexibility is needed. These cables are used for instrumention, control and connecting of control units in mechanical tool construction, conveyor and assembly lines, production lines, any areas where continuous bending loads for free movement without tensile load forced movement in the cable trailing chain is required. And also consisting of tinned copper wires as screen provides protection against external pulses and ensures an interference-free transmission.

Cable design Tehnical data
Conductor : Plain Cu wires, flexible.
Insulation : PVC compound
Core identification : According to VDE 0293 white imprinting numbers on black cores, with green-yellow.
Lay-up : Cores laid up in layers of optimum pitch.
Separator : Textile bandaging
Inner Sheath : PVC compound, RAL 7001, Grey
Screen : Braid of tinned Cu wires, %85 coverage.
Outer Sheath : Oil and flame resistant special PVC compound
Outer Colour : RAL 7001, Grey
Standard : VDE 0250
Insulation resistance : >20 Mohm.km
Rated voltage Uo/U : 300 / 500 V
Test voltage (AC 50 Hz) : 2000 V
Temperature range : -40°C / +70°C
Min. Bending radius : 15x Cable diameter
Flame Retardant Test : IEC 332.1
Oil test : VDE 0472 part 803 at
90 °C 7x24 hours