Pair : 2 - 20
Cross-Section: 0.22 mm2 - 2.5 mm2
Cables | Data cables
LI2Y(St)CY-PIMF
APPLICATION:

These screened flexible control and connecting cables are used in instrumentation and control engineering; in industrial electronics, computers, information and transmission systems office machines,transmission of analogue and digital signals in processor; data transmission cables for voice frequncy transmission. Individual screen and consisting of tinned copper wires as screen provides protection against external pulses. Also tinned copper drain wires for continuity of individual screen and for earthing. Because of insulation PE compound; large amount of datas can be transfer.

Cable design Tehnical data
Conductor : Plain Cu wires, flexible, IEC 228-5
0.22 mm2 : (tinned copper)
Insulation : PVC compound; DIN 47100 or numbered cores.
Pair : Two conductors twisted to a pair.
PIMF Construction : Wrapping of polyester tape, with drain wire (7 wires), AL-PES tape and polyester tape wrapping.
Lay-up : PIMF laid up in layers of optimum pitch.
Separator : Polyester tape
1. Screen : With tinned drain wire (7 wires) under the AL-PES tape.
2. Screen : Braid of tinned Cu wires, approx. %85 coverage.
Outer Sheath : PVC compound, RAL 7032
Standard : VDE 0812, VDE 0814
Insulation resistance : >5000 Mohm.km
Mutual capatitance (800 Hz) : 140 nF/km
Operating voltage : 300 V
Test voltage : 1200 V
Temperature range : -30 °C / +80 °C
Min. Bending radius : 15x Cable diameter
Flame Retardant Test : IEC 332.1