Pair : 2 - 20
Cross-Section: 0.22 mm2 - 1.5 mm2		 Cables | Data cables
LIY(St)Y-PF
APPLICATION:

These twisted pair and screened data transmision cables are used for data engineering where low current consumptions are required and transmision of the data must be continuous where the connection of computers, security system, information and transmission systems, transmission of analogue and digital signals in processor-controlled equipment, And also screen provides protection against external pulses. Underground installation is not permitted.
Cable design Tehnical data
Conductor : Plain Cu wires, flexible, IEC 228-5
0.22 mm2 : (tinned copper)
Insulation : PVC compound
Core identification : DIN 47100 or numbered cores.
Pair : Two conductors twisted to a pai.
Lay-up : Pairs laid up in layers of optimum pitch.
Separator : Polyester tape
Screen : With tinned drain wire under the AL-PES tape.
Outer Sheath : Flame-retardant special PVC compound.
Outer Colour : RAL 7032, Grey
Standard : VDE 0812, VDE 0814
Insulation resistance : >50 Mohm.km
Mutual capatitance (800 Hz) : 120 nF/km
Operating voltage : 300 V
Test voltage : 1200 V
Temperature range : -30 °C / +80 °C
Min. Bending radius : 15x Cable diameter
Flame Retardant Test : IEC 332.1