Pair: 2 - 5
Cross-Section: 1,50 mm2 - 4 mm2
Cables | Halogen Free Flame Redundant cables

NHXMH  HFFR SIGNAL AND CONTROL CABLE

Application

These halogen-free cables are used in dry, moist and wet rooms, for permanent installation above , on, in and beneath plaster as well as in mansory walls and concrete with the exception of direct embedding in vibration-compacted and tamped concrete, as well as for outdoor applications ; where human life and material assets are to be protected. In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low. No corrosive gases are emitted in the event of fire.

Cable design Tehnical data
Conductor : Plain Cu wire, solid-core IEC 228-1.
Insulation : Halogen free XL polymer Compus.
Core identification : VDE 0293-308   
Lay-up : Cores laid up in layers of optimum pitch
Filler : HFFR filler compound    
Outer Sheath : HHFR compound.
Sheath Colour : Grey
Standard : VDE 0250 PART 214
Conductor Operating Temp. : 90 °C
Rated Voltage Uo/U : 300 / 500 V.
Test voltage (AC 50 Hz) : 2000 V
Temperature range : -30 °C / +70 °C
Min. Bending radius : 15 x Cable diameter
Flame test : IEC 332-1 & IEC 332-3