Pair no : 2 - 600
Cross-section:0,40 mm, 0.50 mm,
                          0,60 mm, 0,90 mm		 Cables | Telecomunication cables
PD-PAP(Underground Telephone Cables)
APPLICATION:

APPLICATION: These cables are used for in transmission and distribution of network. Designed to use in ducts not inside the water. 0.50 mm. conductor diameter are used for distribution network, cables having 0.6 and 0.9 mm. conductor diameter are used for long distance network. The use of installation cables for power cable applications is not permitted.
Cable design Tehnical data
Conductor : Solid annealed copper.
Insulation : Solid PE compound.
Lay-up : Quads, each having speacial lay length, are assembled into 10 pairs unit.
Separator : Polyester tape.
Inner Sheath : PE compound.
Screen : Laminated aluminium foil.
Outer Sheath : PE compound, Black.
Standard : TS 3930
Conductor resistance (20 °C) : 0,5 mm : 89,4   
0,6 mm : 62,1   
0,9 mm : 27,6   
Insulation resistance : 0,5 mm : 10000 Mohm.km  0,6 mm : 15000 Mohm.km 
0,9 mm : 15000 Mohm.km
Mutual Capacitance (800 Hz) : 0,5 mm : 52 nF/km
0,6 mm : 50 nF/km
0,9 mm : 50 nF/km   
         Between quads : Max. Ortalama
Capacity Unbalanced max. : 0,5 mm : 150 pF/ 500m
0,6 mm : 150 pF/ 500mt   
0,9 mm : 100 pF / 500 mt
Operating voltage : 0,5 mm : 300 V   
0,6 mm : 300 V
0,9 mm : 300 V
Dielectric strength DC : 0,5 mm : 1000 V
0,6 mm : 1400 V   
0,9 mm : 2100 V
Temperature range : -40 °C +70 °C
Min. Bending radius : 15 x Kablo çapı